The most important thing is to mix a little at a time so you can get an exact match. As usual, this means painting your attempt on the surface somewhere and let them dry before attempting to call it a match. When it matches, you’ll know. No question then proceed to paint with that batch of mixture. If you do t like it you can always paint over it 

Jim

Sent from my iPhone

> On May 3, 2021, at 3:12 PM, Jim Felder <jim.felder@gmail.com> wrote:
> 
> Semi gloss as I recall. Gloss would probably be ok if applied thin enough in multiple coats to take on the texture of the surface. 
> 
> Jim
> 
> Sent from my iPhone
> 
>> On May 3, 2021, at 2:20 PM, Eric Caron <ericcaron96@comcast.net> wrote:
>> 
>> Hi Jim,
>> 
>> Do you remember if you used glossy or Satin paint?  I have to know as much as possible for my helper!
>> 
>> Eric 
>> 
>> 
>>>> On May 3, 2021, at 3:00 PM, Jim Felder <jim.felder@gmail.com> wrote:
>>> 
>>> Just the repair. 
>>> 
>>> Jim
>>> 
>>> Sent from my iPhone
>>> 
>>>>> On May 3, 2021, at 12:54 PM, Eric Caron <ericcaron96@comcast.net> wrote:
>>>> 
>>>> Hi Jim,
>>>> 
>>>> Did you paint just the repair or entire door?
>>>> 
>>>> Sounds like just the repair. 
>>>> 
>>>> Wish we had a video I could show a potential helper!  My repairs would be much smaller then that one.
>>>> 
>>>> Eric 
>>>> 
>>>> 
>>>>> On May 3, 2021, at 12:50 PM, Jim Felder <jim.felder@GMAIL.COM> wrote:
>>>>> 
>>>>> I did a repair like that about 17 years ago and you still can’t detect it. I bought a replacement low cabinet for my Westy (mine was missing when I got the car). The front corner near the stove had been crushed in shipping. I built it back up with bondo and shaped it square and flush with file and sandpaper. I took some white rustoleum paint in a jar cap and added a few drops of black and a few drops of red until it was a perfect match.  Two coats over primer over the bondo. No one could ever tell it had been damaged unless I told them and even then they would have
>>>>> To take my word for it. 
>>>>> 
>>>>> Jim
>>>>> 
>>>>> Sent from my iPhone
>>>>> 
>>>>>>> On May 2, 2021, at 9:53 PM, Gene P <olgreywoof@gmail.com> wrote:
>>>>>> 
>>>>>> Not in the van, but I did a serviceable job of repairing a small burn ding in a kitchen counter.  (Soldering in the kitchen without protecting against accidents, really?)  Rust-Oleum has a product called Appliance Touch-up – tiny bottle with a little brush attached to the cap, like fingernail polish.  I don’t know about colors, but I’d think you could tint it anyway.  Multiple coats to build up deeper dings.
>>>>>> 
>>>>>> From: Eric Caron
>>>>>> Sent: Sunday, May 2, 2021 6:39 PM
>>>>>> To: vanagon@GERRY.VANAGON.COM
>>>>>> Subject: Tan repairs laminant
>>>>>> 
>>>>>> Hi creative listers.
>>>>>> 
>>>>>> I’m sure all of our vans have received a few dings from loving use.
>>>>>> 
>>>>>> I’ve learned of creative ways of doing many repairs.  But, has someone come up with a way of fixing small dents or dings in the laminant?
>>>>>> 
>>>>>> There are tricks for fixing chips in granite counters that use clear fill like super glue.  And all kinds of creative ideas. 
>>>>>> 
>>>>>> So, anyone know of a success to fill  small gashes in the surface? 
>>>>>> 
>>>>>> Fill and touch up paint for laminant?
>>>>>> 
>>>>>> 
>>>>>> Eric Caron 85 GL Auto 
>>>> 
>>