I have a table leg knob made for me out of solid stainless billet with the knob part being about twice as thick as the plastic knob, and it is knurled. It is beautiful. Threads are lathe cut into the billet. I’d let it go to someone’s this list who wants it. Thirty bucks and shipping. 

Jim

Sent from my iPhone

> On May 3, 2021, at 7:29 PM, Ryan Perry <rjdperry@gmail.com> wrote:
> 
> Pin is just when not using the table so mostly in for travel. Then when at
> camp remove pin and use the knob as usual.
> I have one configuration up high just under spice rack and over sink that I
> lock in for camping sometimes. Makes for easy access to the two side
> cupboards and kitchen sink for water. It's also a nice bar set up high to
> mix drinks.
> 
> Here are a couple more images showing a bit more
> 
> https://photos.app.goo.gl/ZuCjKPMD2Z99pLgf6
> 
> 
>> On Mon, May 3, 2021, 8:00 PM Eric Caron <ericcaron96@comcast.net> wrote:
>> 
>> Thank you for this.
>> 
>> Great to know this is a possible workable mod.
>> 
>> I’ll go over the pictures with someone but can you tell me.  Do you still
>> use the knob to tighten or is that gone and you just use the pin for
>> different locations?
>> 
>> I’m hoping the knob is still functional and the pin and holes add
>> functionality.
>> 
>> Eric Caron 85 GL auto
>> 
>> 
>> 
>> On May 3, 2021, at 6:53 PM, Ryan Perry <rjdperry@gmail.com> wrote:
>> 
>> That is the solution used in my van. Hole is in line of the leg with a
>> collar and a cotter pin. Multiple holes so it can be moved up and over the
>> sink or down for traveling. I also have the PVC insert so it can be brought
>> all the way up. It works great, looks better than most solutions I have
>> seen and easy to manage.
>> 
>> https://photos.app.goo.gl/RWYAb6oePANHuHAv6
>> 
>> Hope that helps!
>> Ryan in Asheville
>> 
>> 
>>