Hi Eric, From what I saw, the pin is a way to set the table to different
heights, which would be nice.  But I would like to find a way to lock it
for traveling without having to reach under and turn the knob under there.
I don't see how a person with large hands can even do so.  Perhaps with the
pin, it can be set at a higher level, and then lock with the screw?

On Tue, May 4, 2021 at 8:03 PM Eric Caron <ericcaron96@comcast.net> wrote:

> Hi David,
>
> Earlier in the thread Ryan described that the function is the same as
> without the pin.  The added pin locks the table in certain set positions
> with the pin.  He didn’t discuss rattle or other things. ]
> He gave some pictures I’m looking forward to going over. The earlier posts
> had the picture links.
>
> I’m not completely understanding the placement of the pin or what the pin
> looks like but I can visualize it.
>
> For me I would put the pin in the cabinet so it doesn’t show and change
> the original look.  I’m not sure where his pictures show it is.
>
> Eric Caron
> 85 GL Auto
>
>
>
> On May 4, 2021, at 10:55 PM, David McNeely <davmcneely40@gmail.com> wrote:
>
> So,are you saying that the pin obviates the under table screw for
> fastening the table in place?  With the pin, does the table fit tightly in
> place with no rattles?
>
> On Tue, May 4, 2021 at 10:45 AM Eric Caron <ericcaron96@comcast.net>
> wrote:
>
>> Not sure why you are not getting the entire threads.
>>
>> This is a way of using a drilled hole in the table and collar with a
>> pin.  The several holes lock the table from swinging out in travel or lock
>> up in useful positions when camped.  Pin out and all works normally.
>>
>>         A elligent solution.
>>
>> Eric
>>
>>
>> > On May 4, 2021, at 10:42 AM, OlRivrRat <OlRivrRat@COMCAST.NET> wrote:
>> >
>> >        Would You Describe the Problem that This Mod Solves ~ Please ~
>> >
>> >> On 4 May , 2021, at 5:27 AM, Ryan Perry <rjdperry@GMAIL.COM> wrote:
>> >>
>> >> Yeah, it is rock solid for sure. You can tug on it all day long it is
>> not
>> >> moving.
>> >>
>> >> This in my estimation solves a problem of table swing while looking
>> fairly
>> >> stock.
>> >>
>> >> The goal in my van has always been to make needed upgrades that don't
>> >> disrupt the factory look...as much as possible it is certainly a
>> balancing
>> >> game. (I have done the rear closet sliders so could be an argument to
>> be
>> >> made there.) But first glance across my van, you would see pretty much
>> a
>> >> factory look.
>> >>
>> >> The table leg was a good mod in my opinion. Fixes a problem with
>> minimal
>> >> disruption.
>> >>
>> >> Ryan (that's me)
>> >> Asheville
>>
>
>