

| Subject: | Re: Tan repairs laminant |
| From: | Jim Felder |
| Date: | Mon, 3 May 2021 15:12:44 -0500 |
Semi gloss as I recall. Gloss would probably be ok if applied thin enough in multiple coats to take on the texture of the surface. Jim Sent from my iPhone > On May 3, 2021, at 2:20 PM, Eric Caron <ericcaron96@comcast.net> wrote: > > Hi Jim, > > Do you remember if you used glossy or Satin paint? I have to know as much as possible for my helper! > > Eric > > >> On May 3, 2021, at 3:00 PM, Jim Felder <jim.felder@gmail.com> wrote: >> >> Just the repair. >> >> Jim >> >> Sent from my iPhone >> >>>> On May 3, 2021, at 12:54 PM, Eric Caron <ericcaron96@comcast.net> wrote: >>> >>> Hi Jim, >>> >>> Did you paint just the repair or entire door? >>> >>> Sounds like just the repair. >>> >>> Wish we had a video I could show a potential helper! My repairs would be much smaller then that one. >>> >>> Eric >>> >>> >>>> On May 3, 2021, at 12:50 PM, Jim Felder <jim.felder@GMAIL.COM> wrote: >>>> >>>> I did a repair like that about 17 years ago and you still can’t detect it. I bought a replacement low cabinet for my Westy (mine was missing when I got the car). The front corner near the stove had been crushed in shipping. I built it back up with bondo and shaped it square and flush with file and sandpaper. I took some white rustoleum paint in a jar cap and added a few drops of black and a few drops of red until it was a perfect match. Two coats over primer over the bondo. No one could ever tell it had been damaged unless I told them and even then they would have >>>> To take my word for it. >>>> >>>> Jim >>>> >>>> Sent from my iPhone >>>> >>>>>> On May 2, 2021, at 9:53 PM, Gene P <olgreywoof@gmail.com> wrote: >>>>> >>>>> Not in the van, but I did a serviceable job of repairing a small burn ding in a kitchen counter. (Soldering in the kitchen without protecting against accidents, really?) Rust-Oleum has a product called Appliance Touch-up – tiny bottle with a little brush attached to the cap, like fingernail polish. I don’t know about colors, but I’d think you could tint it anyway. Multiple coats to build up deeper dings. >>>>> >>>>> From: Eric Caron >>>>> Sent: Sunday, May 2, 2021 6:39 PM >>>>> To: vanagon@GERRY.VANAGON.COM >>>>> Subject: Tan repairs laminant >>>>> >>>>> Hi creative listers. >>>>> >>>>> I’m sure all of our vans have received a few dings from loving use. >>>>> >>>>> I’ve learned of creative ways of doing many repairs. But, has someone come up with a way of fixing small dents or dings in the laminant? >>>>> >>>>> There are tricks for fixing chips in granite counters that use clear fill like super glue. And all kinds of creative ideas. >>>>> >>>>> So, anyone know of a success to fill small gashes in the surface? >>>>> >>>>> Fill and touch up paint for laminant? >>>>> >>>>> >>>>> Eric Caron 85 GL Auto >>> >
Have something to add on this topic today? Revive this thread in the forum »