When the Van arrived back in ABQ, that was 1 of the things that I looked @ 1st as I had just

replaced those connectors a few months back due to their dilapidated condition & closeness to the

the intake plumbing ~ Only had about 15mins to give a quick look before it was off to its resting

place for a week before I can flat tow it back to My place for Hopeful Repair ~

> On 15 Jun , 2021, at 7:36 PM, vw_van_fan_Mark <madvws@COX.NET> wrote:
> 
> The usual cause of that 2.1 injection harness damage is a shorted wire
> to the power steering pressure switch.
> Often the wire end comes loose from the switch and touches metal.
> The switch wire ends came originally with protective covers but these
> covers get degraded and fall off.
> 
> There are no stock fuses protecting the main injection harness but it is
> becoming common to add one.
> 
> Mark
> 
> OlRivrRat wrote:
>>        This happened to a friends Van this Morn’,, Any guesses as to where to start looking
>> 
>> for a short ~ I’d guess is that it was most likely some circuit that is not Fused ~
>> 
>> https://photos.app.goo.gl/cud5h34QF7vpB76N9
>>