I asked Jay to make my relay kits with longer wire to accommodate the
different locations. He obliged.

On Sat, Jun 26, 2021 at 9:27 AM OlRivrRat <OlRivrRat@comcast.net> wrote:

>         I made My Own HeadLight Relay Setup before I was aware of JBrowns
> Good Stuff
>
> & I located the Relays on the Nice Convenient “Tray” that attaches the
> Steering Column
>
> to the Dash,, Not sure if JB’s wires will reach to there though ~
>
>
> > On 25 Jun , 2021, at 9:32 PM, John Rodgers <jrodgers113@GMAIL.COM>
> wrote:
> >
> > Have a problem with headlights cutting out.  Getting a new switch. The
> > switch for the '90-91 vans is different from earlier models I've learned.
> > More expensive too. THE EARLIER ONES AR 8 PIN, THE NEWER ONES ARE 10 PIN.
> > Something to watch out for. I'M going to put  Jay Brown's relay kit in
> when
> > I replace it. From earlier experience, I found trying to mount them below
> > the dash on the left side as instructed was a real PITA. They didn't want
> > to stay put.  I found I could mount them on the metal on the side of the
> > switch under the dash pod cover. Easy access.
>
>