Cool,,,, Aint He Just Great ~

> On 26 Jun , 2021, at 9:04 AM, John Rodgers <jrodgers113@GMAIL.COM> wrote:
> 
> I asked Jay to make my relay kits with longer wire to accommodate the
> different locations. He obliged.
> 
> On Sat, Jun 26, 2021 at 9:27 AM OlRivrRat <OlRivrRat@comcast.net> wrote:
> 
>>        I made My Own HeadLight Relay Setup before I was aware of JBrowns
>> Good Stuff
>> 
>> & I located the Relays on the Nice Convenient “Tray” that attaches the
>> Steering Column
>> 
>> to the Dash,, Not sure if JB’s wires will reach to there though ~
>> 
>> 
>>> On 25 Jun , 2021, at 9:32 PM, John Rodgers <jrodgers113@GMAIL.COM>
>> wrote:
>>> 
>>> Have a problem with headlights cutting out.  Getting a new switch. The
>>> switch for the '90-91 vans is different from earlier models I've learned.
>>> More expensive too. THE EARLIER ONES AR 8 PIN, THE NEWER ONES ARE 10 PIN.
>>> Something to watch out for. I'M going to put  Jay Brown's relay kit in
>> when
>>> I replace it. From earlier experience, I found trying to mount them below
>>> the dash on the left side as instructed was a real PITA. They didn't want
>>> to stay put.  I found I could mount them on the metal on the side of the
>>> switch under the dash pod cover. Easy access.
>> 
>>