CG can only be changed by moving weight around,, Altering Height will not move CG ~

Instead of messing with spacers I would suggest moving Your Propane Tank to Pass’ Side &

maybe even Your AuxBatt to Pass’ Side Under Rear Seat ~

                                                        ORR ~ DeanB  

> On 14 Jul , 2021, at 6:16 AM, David Boan <dboan@OUTLOOK.COM> wrote:
> 
> Hi Vanagon Types
> 
> Several months ago I purchased the GW Coil Spring bundle for 2wd.  I installed the rear springs only and waited on the front.  Now I am considering not using the lift springs in the front and I am interested in any feedback on this.
> 
> On my '85, with the original springs in the front and 1.5" lift springs in the back, I get the following height from the center of the wheel to the wheel well:
> 
> Front right: 18 5/8"
> Front Left: 18"
> Rear right: 18 1/8"
> Rear left: 17 1/2"
> 
> Those numbers are on an empty van with a full propane tank and an accessory battery in the closet.
> 
> From what I have read, 18" to 18.5" seems to be the stock height for an '85.
> 
> I think if I use lift springs in the front it will likely make the difference worse by slightly shifting the CG back and putting more weight on the rear.  Instead, I am considering not lifting the front and instead install 0" lift front springs (hopefully help balance and stiffen the front) and then add a 1/2" spacer on the rear left.
> 
> Am I missing something?
> 
> Dave B
> '85 Westy
> Boise