NICE    :-)

On Wed, Jul 21, 2021 at 3:46 PM Rob <vwrobb@gmail.com> wrote:

> It was the belt on the drivers side!
> The belt got behind the moving parts, the plastic sleeve where it
> mounts at the side wall (next to the person) was bent in half. A GOOD
> flashlight allowed me to see the problem. I routed the belt back to
> where it belonged and was able get it unstuck.
> Thanks!
>
> Rob
> vwrobb@gmail.com
>
> On Wed, Jul 21, 2021 at 3:01 PM Dan N <dn92610@gmail.com> wrote:
> >
> > Check all the seat belts... mine got stuck like that because the seat
> belts were in the way for the bed mechanism to me freely...
> >
> > On Wed, Jul 21, 2021 at 1:46 PM Rob <vwrobb@gmail.com> wrote:
> >>
> >> I have a 90 Vanagon tintop with the full across zee bed in the back. I
> >> cannot get it to pull out into the bed. It used to....
> >>
> >> The seat back is released, the seat goes up and down just fine but I
> >> can't pull the bed out. I've lubed all the hinges that I can see but
> >> It just does not move... Any advice?
> >>
> >> Rob
> >> vwrobb@gmail.com
>