Does the dash have to come off to repair? Wondering if this is something I should fix myself or take it back. I haven’t watched any videos yet …

Jeff

Sent from my iPhone

> On Aug 20, 2021, at 10:15 AM, Dan N <dn92610@gmail.com> wrote:
> 
> I agree with Jim.... specially the cable sheath is held in a specific
> position by a cable sheath holder with a bolt. When it's to far out or too
> far in the lever can't slide easily, or the cable itself can't reach either
> end too open or close. I discover this when I removed the dash to replace
> the blower. The best is testing those levers before putting the dash back
> on.
> 
>> On Fri, Aug 20, 2021 at 7:52 AM Jim. Felder <jim.felder@gmail.com> wrote:
>> 
>> If you take the heater box out you must take the cables loose and that
>> means readjust them to go in exactly as they came out. If you don't mark
>> them precisely, this becomes a time-consuming hit-or-miss process. If you
>> do it wrong on the slider end of the cable or make things too stiff on the
>> heater box end of the cable, the cable will fold/double and then you can't
>> do anything with it. A look under the dash at the slider end of things will
>> tell you what you need to know about bending the cable. I think you can
>> inspect it by removing the instrument cluster, but if not you can pull the
>> faceplate off the dash and see what is going on with the cables.
>> 
>> Jim
>> 
>> On Fri, Aug 20, 2021 at 8:40 AM Jeff Palmer <w.jeff.palmer@icloud.com>
>> wrote:
>> 
>>> Morning everyone!
>>> 
>>> 85 Westfalia GL.  My friendly neighbourhood garage replaced my front
>>> blower fan the other day.  It had seized some time ago.  When the van was
>>> returned, I noticed that the level the controls airflow to the feet isn’t
>>> opening or closing fully.  I spoke with the mechanic and he says he
>> didn’t
>>> touch the vents, but the issue is with the cables, right?  I’ve never had
>>> trouble before, but have read about others who have.  I do not have the
>>> ‘always on’ heat issue.  This is strictly a vent issue.
>>> 
>>> If anyone can help give me some guidance I would appreciate it!  He’s
>>> offered to look at it but I would like to give him some direction.
>>> 
>>> Thanks again
>>> Jeff
>>