

| Subject: | Re: no start no click |
| From: | Thomas Casal |
| Date: | Wed, 25 Aug 2021 12:58:31 -0400 |
Thanks a ton for the help fellas. The Amazon starter looks nice and in expensive. my only issue is I have the Gowesty gear reduction starter and it’s been so long since I installed it I’m noticing I only have 3 wires connected to the starter and not the 4 shone in the Bentley. I may just spend the extra coin and the extra wait to receive and go with the Gowesty again just so I don’t have to figure out where that 4th wire went. On Wed, Aug 25, 2021 at 12:31 PM <stuartmacm@gmail.com> wrote: > Now you have another tool to carry! Solenoid is sticking, a good auto > electric shop should be able to fix it. If not, switch to the diesel > starter and adapter: https://www.vancafe.com/WV-001-p/wv-001.htm Good > quality stater knock off available from Amazon. Search for SR0408X. > > > > Stuart > > > > *From:* Thomas Casal <thomas.casal@gmail.com> > *Sent:* Wednesday, August 25, 2021 9:07 AM > *To:* stuartmacm@gmail.com > *Cc:* Vanagon Mailing List <vanagon@gerry.vanagon.com> > *Subject:* Re: no start no click > > > > Stuart the old tappy tap worked. Son of a gun! So my starter is dying. > it's only 10 years old maybe 70k miles! What are you guys using the diesel > starters these days? > > > > On Wed, Aug 25, 2021 at 11:59 AM Thomas Casal <thomas.casal@gmail.com> > wrote: > > Thanks guys its a manual trans. Do I have to tap it when someones cranking > it? I got under there with the multimeter and my buddy cranked it i'm > getting 7 volts at the solenoid. That aint right clearly. Is that > indicating the ignition switch died on me? > > > > On Wed, Aug 25, 2021 at 11:56 AM <stuartmacm@gmail.com> wrote: > > First tap on the solenoid lightly with a hammer. Manual or automatic? If > it's an automatic you likely need to replace these if the tap has no > effect: > https://www.gowesty.com/product/automatic/24854/neutral-safety-switch-bundle?v= > . > > Stuart > > -----Original Message----- > From: Vanagon Mailing List <vanagon@gerry.vanagon.com> On Behalf Of > Thomas Casal > Sent: Wednesday, August 25, 2021 8:35 AM > To: vanagon@GERRY.VANAGON.COM > Subject: no start no click > > Hello Everybody, > > About to head up to the white mountains today jump in the westy turn the > key and no crank no click ugh! Almost like the solenoid isn't being > excited. I hear the fuel pump, checked the voltage at the battery thats all > good. Didn't check it while cranking, have to get a buddy to help me out. > The ignition switch is only a couple years old starter is a gowest gear > reduction starter it's probably 10 years old now. Usually when this stuff > happens it's because I touched something but all i've done is an oil change > and cut out the base plate of the seat to access that space under the > drivers seat since i parked it a month ago. Battery is fully charged. 2.3 > gowesty motor on an 84 so 1.9 setup. Any and all suggestions are > appreciated. thanks tom > >
Have something to add on this topic today? Revive this thread in the forum »