Thanks!

Jim

On Wed, Oct 20, 2021 at 1:56 PM mccullough bob <mbob1950@gmail.com> wrote:

> Hope this helps Steven
>
>
>
>
>
>
>
>
> I put the cans towards the rear of the space with the lid to the front
>
>
>
>
>
> I have them on both sides of the van the left one will lay over the AC
> hoses and needs the white spacers.
>
>
>
> I used 4 bolts to secure them. i first got them in place with a jack
> and then drilled down thru the floor depressions  and the can top. Bolts
> were
> secured to the can and jacked back in to place and secured.
> Then the excess bolt was cut off.
>
>
>
> View of floor. I cut some of the foam and filled it in.
>
>
>
> I removed the snap latches and welded some connecting nuts to secure the
> lid.
> To get the right spacing I welded one nut and then another to it.
> The can is 2 to 3 inches higher that the prop shaft cover on my Syncro.
>
>
>
>
> I used safety allen bolts to secure it. Nice Safe when you leave it at the
> trailhead.
>
>
>
>
>
>
>  Bob
>
> 86 Syncro
> 91 Westy