

| Subject: | Re: Any advice on brake master cylinder? |
| From: | Raimund Feussner |
| Date: | Wed, 3 Nov 2021 18:54:48 +0100 |
Oh, and don´t return soaked dish towels to your wife´s kitchen! Am 03.11.2021 um 18:52 schrieb Raimund Feussner: > Been there three times in the last five months (don´t ask!) > > A lot of paper towels and dish towels. > Get as much fluid out of the reservoir as possible before removing. > Open a caliper bleeder (and pump pedal) to let, more than all!, fluid > from the main cylinder empty elsewhere, but not in/on your interior! > > Put rubber mat on floor. Put paper towels on the cross bream below the > brake booster. Put them on the brake booster. > Put them everywhere. > > The mechanical aspect is straight forward. > Replace gasket between cylinder and booster. > > > Refilling: > Put towels around the reservoir opening. > Don´t overfill, especially if you bleed with a pressure bleeder on the > reservior. Removing it will spill. Use towels when removing pressure > hose. > > If still in place, use the stock clear plastic foil (between reservoir > opening and the instrument cluster) as emergency trap for overflowing > fluid. Better spill on the plastic than onto cluster and its > surroundings. Additional towels help. > > > Final hint: > Did I mention towels?! > > Regards > Raimund > > > > Am 03.11.2021 um 18:25 schrieb dan h: >> I am a total noob and I’m going to replace my brake master cylinder >> this weekend. Any sage advise or grave warnings before I start? >> >> � From Dan Hoffman
Have something to add on this topic today? Revive this thread in the forum »