While I know well that Hydraulic Fluids are quite adept @ Creeping, I am

doubtful that if the Seal @ the Booster End of the MC is leaking that it would be

finding Its way back up & out of the Booster, especially in an amount that would

cause it to Drip,, Be sure 1st that there is no sign of leakage around the reservoir

seals & check the underside of the reservoir for signs of a leak/crack ~

> On 16 Mar , 2022, at 1:42 PM, Tom C <thomas.casal@GMAIL.COM> wrote:
> 
> Thank gentlemen! That’s what I figured. Do you all have a bench bleeder you
> prefer or should I just use my motive power bleeder?
> 
> On Wed, Mar 16, 2022 at 3:19 PM Tom Hargrave <thargrav@hiwaay.net> wrote:
> 
>> The lip seal at the rear of your master cylinder is failing and you need
>> to replace your master cylinder now verses later.
>> 
>> The risk is the leak will get worse, you will lose too much brake fluid
>> and your brakes will fail. But it's a common service part.
>> 
>> Thanks, Tom Hargrave
>> www.kegkits.com – Electric Brewery Info
>> www.towercooler.com – Beer Tower Cooler
>> http://goo.gl/niRzVw - My Amazon Store
>> www.brew-control.com – Electric Brewery Marketing and Direct Sales
>> http://www.hackpilot.com/roadkill/ - A little twisted humor
>> 
>> 
>> 
>> -----Original Message-----
>> From: Vanagon Mailing List [mailto:vanagon@gerry.vanagon.com] On Behalf
>> Of Tom C
>> Sent: Wednesday, March 16, 2022 12:25 PM
>> To: vanagon@GERRY.VANAGON.COM
>> Subject: Brake master cylinder weep
>> 
>> Hey Guys,
>> 
>> I think my brake master cylinder has a slight weep. It’s not visibly
>> leaking anywhere it just looks slightly wet we’re it bolts into the booster
>> and it seems like it’s very slowly and gradually making its way down the
>> booster onto the wires and then a little drip. What do you guys think?  Any
>> advice would be greatly appreciated. Thanks tom
>> -----
>> No virus found in this message.
>> Checked by AVG - www.avg.com
>> Version: 2016.0.7924 / Virus Database: 4793/15886 - Release Date: 08/14/18
>> Internal Virus Database is out of date.
>> 
>>