

| Subject: | Re: Engine Conversion |
| From: | John Rodgers |
| Date: | Sat, 19 Mar 2022 15:27:11 -0500 |
Thanks! On Sat, Mar 19, 2022 at 10:46 AM Dennis Haynes <d23haynes57@hotmail.com> wrote: > The Subie 2.5 is definitely a nice choice. Here are some added pointers. > If using the stock auto and gearing also consider an oil temp gauge. In a > Subaru that engine does not run at 4K+ for any length of time. > Consider upgrading the transmission beginning with the ATF cooling. You > definitely want an ATF temp gauge. Get the cooling off the engine cooling > system and add an inline ATF filter. > Regearing can help. Last year I did have a very bad experience with some > 3.73 gearsets. For that engine I would consider the 3.27. German Transaxle > offers a low stall torque converter, highly recommend even for Waterboxer. > Tey also offer a 4 gear planetary and modified clutch pack. The I have seen > torque converter, R+P and other trans failures wit that engine. > Easy re-gear wheels and tires. 225/55-17 or 225/60-16 will give about 3 > mph gain. > > A short while back I mentioned the Atoto S8 in dash media center. A torque > pro and tpms program is preloaded. Use an 8" screen instead of the cell > phone. Bluetooth or USB connections. Fun Bus wil be getting one also. > Of course if doing tires-wheels also consider a brake upgrade. For now I'm > sticking with the GoWesty sets. > > Go get many miles on it and enjoy. > > Dennis > > > -----Original Message----- > From: Vanagon Mailing List <vanagon@gerry.vanagon.com> On Behalf Of John > Rodgers > Sent: Saturday, March 19, 2022 5:47 AM > To: vanagon@GERRY.VANAGON.COM > Subject: Engine Conversion > > After a seemingly interminable wait, my van with its new rice rocket > engine conversion is nearly complete. It now has a completely overhauled ej > 2.5 in it. All new bearings, new rings, rebuilt heads. It has been > driveable for a short time - and goes like a scalded rabbit - but needed > some few additional things to make it complete. AC needed hooking up, power > steering belt needed installing, an oil pressure gage needed to be > installed. One thing added was telemetry for the OBD 2. I can now read the > OBD 2 on my cell phone while I am driving. > > Boy what a difference this conversion makes. By the way, I went the Small > Car route except for the trans adapter kit. For that I went to an Outfront > Motorsports adapter for an automatic transmission. For the electrical > harness conversion I went to Mick at Busaru.com. The man is a wizard. My > engine came from a 2005 Outback - which is a year I recommend you stay away > from because it's a half= 'n-harf. Part 2004 part 2006 basically. to avoid > a lot of headaches go 2004 back or 2006 forward. but not 2005. After > jumping thru a lot of hoops Mick made that 2005 harness work. > > I recommend this ej2.5 conversion. >
Have something to add on this topic today? Revive this thread in the forum »