

| Subject: | Re: electric or hydraulic power steering |
| From: | Tom C |
| Date: | Thu, 24 Mar 2022 07:39:43 -0400 |
Thanks Dennis…. Decisions decisions On Thu, Mar 24, 2022 at 7:01 AM Dennis Haynes <d23haynes57@hotmail.com> wrote: > Unless the crossover tube is broken the grommets on top of the tank can be > replaced without dropping it. Using the hose kit, the hoses get passed over > the center of the tank so they get installed without removing the tank. > That saves about 3 hours. Pays for the hose set. I tend t work a bit slow > and I like to add some supports for the hoses. Typically take me about 6 > hours for the PS conversion. > > Dennis > > > -----Original Message----- > From: Vanagon Mailing List <vanagon@gerry.vanagon.com> On Behalf Of Tom C > Sent: Wednesday, March 23, 2022 10:57 PM > To: vanagon@GERRY.VANAGON.COM > Subject: Re: electric or hydraulic power steering > > Thanks Dan…. The parts alone get close to 1200$. Electric is looking more > appealing just from a cost perspective and reduction in labor time. I’d do > it myself the less I’m crawling around under the vanagon the better. > > On Wed, Mar 23, 2022 at 7:58 PM Dan N <dn92610@gmail.com> wrote: > > > hi, > > > > This is an estimate from my mechanic: > > * "The conversion to Power steering usually runs around $2500-$3000. > > This includes a new pump, rack, tie rods and hoses. I still have a set > > of good used metal lines. We will have to remove the fuel tank and > possibly reseal. > > Also an alignment will be needed."* > > > > On Fri, Mar 18, 2022 at 12:00 PM Tom C <thomas.casal@gmail.com> wrote: > > > >> Hey Guys, > >> > >> I currently have an 84 westy and I'm kinda feeling like getting some > >> power steering. Been researching the electrical steering kits, seems > >> like the downside is I'd lose the collapsibility of the steering > >> column in the event of a head on collision, and the plastic shroud > >> around the column has to get sliced and diced to fit everything up in > >> there. I do have the bmw booster not sure if that would have an > >> effect? What's the downside of grabbing a power steering rack and > >> running lines to the usual power steering pump spot in the back? I'm > >> about to install new bushing on the rack anyway and the steering > >> stiffner. I have all new bushings except steering and I'm hoping it > >> gets rid of the vibration in the steering wheel I get at highway > >> speeds. > >> I'd prefer not to slice and dice the plastic covers up front but if > >> electric is better I would. Thanks for your thoughts. tom > >> > > >
Have something to add on this topic today? Revive this thread in the forum »