Yep.

Jim

On Mon, Aug 1, 2022 at 10:19 AM Eric Caron <ericcaron96@comcast.net> wrote:

> Well now isn’t that a nice straight forward solution!
>
>         Eric Caron
>
>
> > On Aug 1, 2022, at 11:10 AM, Alistair Bell <albell@SHAW.CA> wrote:
> >
> > Or just pull that fuse in the little box at the drivers side b pillar.
> Or a switch there
> >
> > Alistair
> >
> >> On Aug 1, 2022, at 8:09 AM, Jim Felder <jim.felder@gmail.com> wrote:
> >>
> >> The surprise for me is that there is not a cut-out for the fan circuit
> at
> >> any place where there could be one.
> >>
> >> Maybe a high-temp switch near the burner and a relay for the electric
> modes?
> >>
> >> Jim
> >>
> >>> On Mon, Aug 1, 2022 at 10:05 AM Alistair Bell <albell@shaw.ca> wrote:
> >>>
> >>> What I did some years ago, was to take out the stick thermo switch on
> the
> >>> back fins and replace with thermo probe for a programable tstat. Was
> during
> >>> my ongoing effort to make the propane fridge work a wee bit better.
> >>>
> >>> I thought I’d play with lower temp setting for the fan to come on. Last
> >>> year I replaceded the original , kinda clunky , programable unit for a
> >>> slimmer inkbird brand one.
> >>>
> >>> I wasn’t convinced that adjusting the fan set point really did much.
> But
> >>> the obvious benefit was the fan would stay off if the control unit was
> off.
> >>> No runaway fan on a hot day thing, that this thread is about.
> >>>
> >>> Funny how it’s still a surprise for some that the stock fan works that
> >>> way  :-)
> >>>
> >>> Alistair
> >>>
> >>>> On Jul 31, 2022, at 12:46 PM, Jeff Palmer <w.jeff.palmer@icloud.com>
> >>> wrote:
> >>>>
> >>>
>