I'll probably do that.

Jim

On Mon, Aug 1, 2022 at 10:10 AM Alistair Bell <albell@shaw.ca> wrote:

> Or just pull that fuse in the little box at the drivers side b pillar. Or
> a switch there
>
> Alistair
>
> > On Aug 1, 2022, at 8:09 AM, Jim Felder <jim.felder@gmail.com> wrote:
> >
> > The surprise for me is that there is not a cut-out for the fan circuit
> at
> > any place where there could be one.
> >
> > Maybe a high-temp switch near the burner and a relay for the electric
> modes?
> >
> > Jim
> >
> >> On Mon, Aug 1, 2022 at 10:05 AM Alistair Bell <albell@shaw.ca> wrote:
> >>
> >> What I did some years ago, was to take out the stick thermo switch on
> the
> >> back fins and replace with thermo probe for a programable tstat. Was
> during
> >> my ongoing effort to make the propane fridge work a wee bit better.
> >>
> >> I thought I’d play with lower temp setting for the fan to come on. Last
> >> year I replaceded the original , kinda clunky , programable unit for a
> >> slimmer inkbird brand one.
> >>
> >> I wasn’t convinced that adjusting the fan set point really did much. But
> >> the obvious benefit was the fan would stay off if the control unit was
> off.
> >> No runaway fan on a hot day thing, that this thread is about.
> >>
> >> Funny how it’s still a surprise for some that the stock fan works that
> >> way  :-)
> >>
> >> Alistair
> >>
> >>> On Jul 31, 2022, at 12:46 PM, Jeff Palmer <w.jeff.palmer@icloud.com>
> >> wrote:
> >>>
> >>
>
>