

| Subject: | Re: Creativity needed |
| From: | David McNeely |
| Date: | Sun, 12 Feb 2023 09:01:27 -0800 |
I just covered the vent opening over with an aluminum plate with a gasket when I removed the refrigerator. Of course, the camper already had an electrical port, and I virtually never use it anyway. mcneely On Sun, Feb 12, 2023 at 8:44 AM Alistair Bell <albell@shaw.ca> wrote: > Made a plug in port when I deleted my fridge vent. > > https://shufti.blog/2022/07/23/vanagon-stock-fridge-vent-delete-option/ > > > On Feb 11, 2023, at 9:38 PM, OlRivrRat <OlRivrRat@comcast.net> wrote: > > > > I just had that thought almost exactly only I was thinking a > bit more > > > > specific >> MGD Dispenser ~ > > > > > > > >> On 11 Feb , 2023, at 9:33 PM, Dan N <dn92610@GMAIL.COM> wrote: > >> > >> better yet... coin operated beer dispenser? or liquor dispenser? > >> :-) > >> > >>> On Sat, Feb 11, 2023 at 7:47 PM Eric Caron <ericcaron96@comcast.net> > wrote: > >>> > >>> Coin operated gum-ball dispenser? > >>> > >>> > >>> > >>> > >>>> On Feb 11, 2023, at 6:53 PM, Jim Felder <jim.felder@GMAIL.COM> wrote: > >>>> > >>>> Coal chute. > >>>> > >>>> Jim > >>>> > >>>> On Sat, Feb 11, 2023 at 10:38 AM Eric Caron <ericcaron96@comcast.net> > >>> wrote: > >>>> > >>>>> A new friend met at Busses By the bridge had a connector for a shower > >>> that > >>>>> came out the old refrigerator vent. He had it plumbed so the water > pump > >>>>> powered it. Cold water only but I thought hey if that went into my > >>> solar > >>>>> bag I’d end up with a warm shower! > >>>>> > >>>>> Or, a door with a touch pad to leave my key when away from the van. > >>>>> Or open up and there is a solar hook up and a 12 volt power point. > >>>>> > >>>>> Or a letter drop. > >>>>> > >>>>> A cat door? > >>>>> > >>>>> Eric > >>>>>> On Feb 11, 2023, at 11:27 AM, Steven Johnson <sjohnso2000@GMAIL.COM > > > >>>>> wrote: > >>>>>> > >>>>>> I can't help but think of an ice maker/drinking water delivery > chute. > >>>>>> > >>>>>> Steven > >>>>>> 91 Westy > >>>>>> > >>>>>> On Fri, Feb 10, 2023 at 8:47 PM rob wilke <rob@robwilke.com> wrote: > >>>>>> > >>>>>>> Perhaps some sort of donation portal so that folks can help you > with > >>>>> your > >>>>>>> regular maintenance etc. > >>>>>>> > >>>>>>> On Fri, Feb 10, 2023 at 7:21 PM Eric Caron < > ericcaron96@comcast.net> > >>>>>>> wrote: > >>>>>>> > >>>>>>>> Todays list challenge, > >>>>>>>> > >>>>>>>> > >>>>>>>> I’m looking for some creative ideas. > >>>>>>>> > >>>>>>>> During my winter work on my 84 Westfalia I removed a Atwood > >>>>>>>> furnace. This had been mounted in the small cabinet between bench > >>> and > >>>>>>>> refrigerator. > >>>>>>>> It was vented out the side of the van. I now have a 3 by 5.5 inch > >>>>>>>> rectangular opening. The original vent cover is broken and > missing a > >>>>>>> part > >>>>>>>> that seals it off from weather. > >>>>>>>> > >>>>>>>> So, I need something simple or fun to replace that vent cover > >>>>>>>> I was hoping a simple outdoor house outlet flip cover would > >>> work > >>>>>>>> but it is a bit too small. > >>>>>>>> For now a simple cover such as a rectangle or circle of > >>>>> stainless > >>>>>>>> steel or aluminum would work. > >>>>>>>> > >>>>>>>> I’m wondering if there is something in a hardware store used for > >>>>>>> something > >>>>>>>> else, that could be purposed for this? > >>>>>>>> > >>>>>>>> This would be a good location for something useful down the > >>> road > >>>>>>>> such as an outlet for solar. Or a place to flip open the door and > >>>>> have a > >>>>>>>> 12 power point for plugging in a portable air compressor or light > or > >>>>>>>> something. > >>>>>>>> > >>>>>>>> So, any ideas for a not too ugly cover? Or a small door like > thing? > >>>>>>>> > >>>>>>>> Some creative ideas would be great. > >>>>>>>> > >>>>>>>> Now, you could say use it as a vent for the next furnace. But, > I’m > >>> not > >>>>>>>> sure this van will get one as my other van has a furnace and can > be > >>> the > >>>>>>>> cold weather traveler. > >>>>>>>> > >>>>>>>> You never know as fulks seem to be replacing Probex with Diesel > and > >>> gas > >>>>>>>> models. So a used one could come my way. > >>>>>>>> The Atwood stuck out into the van more than I liked. And has not > >>>>>>>> functioned in over 30 years. It looks like a nice unit so if > anyone > >>>>>>> local > >>>>>>>> wants it, its yours. > >>>>>>>> I found that the propane to the furnace had been disconnected and > >>>>> capped > >>>>>>>> off. The electric connections were still intact. > >>>>>>>> > >>>>>>>> I’m trying to take care of the 84 on a smaller budget. > >>>>>>>> > >>>>>>>> So, creative idea on how to cover that opening? > >>>>>>>> > >>>>>>>> Eric Caron > >>>>>>>> > >>>>>>> > >>>>> > >>> >
Have something to add on this topic today? Revive this thread in the forum »