

| Subject: | Re: Creativity needed |
| From: | OlRivrRat |
| Date: | Fri, 10 Feb 2023 23:52:06 -0700 |
Maybe a starting point https://www.amazon.com/Enerlites-Over-Size-Polycarbonate-Thermoplastic-8801O-W/dp/B06Y93MGN7?th=1 > On 10 Feb , 2023, at 7:21 PM, Eric Caron <ericcaron96@COMCAST.NET> wrote: > > Todays list challenge, > > > I’m looking for some creative ideas. > > During my winter work on my 84 Westfalia I removed a Atwood furnace. This had been mounted in the small cabinet between bench and refrigerator. > It was vented out the side of the van. I now have a 3 by 5.5 inch rectangular opening. The original vent cover is broken and missing a part that seals it off from weather. > > So, I need something simple or fun to replace that vent cover > I was hoping a simple outdoor house outlet flip cover would work but it is a bit too small. > For now a simple cover such as a rectangle or circle of stainless steel or aluminum would work. > > I’m wondering if there is something in a hardware store used for something else, that could be purposed for this? > > This would be a good location for something useful down the road such as an outlet for solar. Or a place to flip open the door and have a 12 power point for plugging in a portable air compressor or light or something. > > So, any ideas for a not too ugly cover? Or a small door like thing? > > Some creative ideas would be great. > > Now, you could say use it as a vent for the next furnace. But, I’m not sure this van will get one as my other van has a furnace and can be the cold weather traveler. > > You never know as fulks seem to be replacing Probex with Diesel and gas models. So a used one could come my way. > The Atwood stuck out into the van more than I liked. And has not functioned in over 30 years. It looks like a nice unit so if anyone local wants it, its yours. > I found that the propane to the furnace had been disconnected and capped off. The electric connections were still intact. > > I’m trying to take care of the 84 on a smaller budget. > > So, creative idea on how to cover that opening? > > Eric Caron
Have something to add on this topic today? Revive this thread in the forum »