I replaced the hoses in my '87 2.1 last fall and am still having an issue with a leak at the connection to the radiator. It's a silicone hose and I don't have a spring clip that fits so I used a screw clamp. I already stripped one clamp trying to get it tighter. I'm thinking I will need to disconnect the hose, clean and dry the connection and use an adhesive/sealant. This will have to wait for warmer weather. Final Charge coolant may be a contributing factor, I recall that Dennis said this coolant may be more prone to leaks like this.

Regards,
Mark

> On Feb 14, 2023, at 2:51 PM, Eric Caron <ericcaron96@COMCAST.NET> wrote:
> 
> Help needed.
> 
> I need to change the two coolant hoses from radiator to metal pipes.
> 
> I have new hoses and spring clamps. 
> 
> I expect just about all the coolant to come out. 
> 
> So, 
> 
> How much coolant is in their and how much do I need to purchase to have on hand to refill? 
> 
> Any tips on draining?
> 
> Any tips on filling and bleeding? 
> 
> This is a 1.9 system. 
> 
> I might as well drain and start over with clean coolant.
> 
> I plan to use the final Charge that Dennis has recommended in the past. 
> 
> All tips and directions are greatly appreciated. 
> 
> Eric Caron 
> 84 Westfalia