Skip to main content
Gerry | Vanagon
Checking account...
← vanagon.com home · Continue the discussion in the forum
Subject:Re: Fuel Sender gasket
From:Eric Caron
Date:Sun, 19 Feb 2023 21:00:04 -0500

OK,

        Good reminder to post your van year and type!

Forget my description of my fuel sender gasket it was about a 2wd.

Eric Caron

> On Feb 19, 2023, at 8:53 PM, rob wilke <rob@ROBWILKE.COM> wrote:
>
> Ah yes. Syncro
>
> On Sun, Feb 19, 2023 at 6:23 PM Dennis Haynes <d23haynes57@hotmail.com>
> wrote:
>
>> Is this a 2 WD or Syncro?
>>
>> Huge difference.
>>
>> Dennis
>>
>>
>> -----Original Message-----
>> From: Vanagon Mailing List <vanagon@gerry.vanagon.com> On Behalf Of rob
>> wilke
>> Sent: Sunday, February 19, 2023 3:11 PM
>> To: vanagon@GERRY.VANAGON.COM
>> Subject: Fuel Sender gasket
>>
>> hope that this is how you post to this list...
>>
>> I have successfully removed the fuel sender etc. and noticed two small
>> indentations opposite each other on the inside surface of the opening. The
>> gasket is correspondingly thick ( thicker than the replacement gaskets
>> are)in the two places of the indentations which seems logical. This is not
>> where the two halves meet.
>> Should i just put it back together and hope all is good?
>>
>> oh and BTW i don't recommend doing this indoors in the winter..
>>
>> Thanks
>> Rob
>>