

| Subject: | Re: grease on axek |
| From: | OlRivrRat |
| Date: | Wed, 4 Oct 2023 11:48:30 -0600 |
Got this 1 via List ~ > On 3 Oct , 2023, at 4:22 AM, ddbjorkman@verizon.net wrote: > > Thanks Dean. > > This is the problem I have been having with the list for some time. The moderators keep telling me that I show up in the archives, so it's there, but no one receives them. It is quite frustrating, especially for something like this. I am back from the trip; bus ran well and no noise from the CV's. Came back with a cold, but when I am better, I will send a pic. > Thanks again my friend. > > Dave B. > the Boston one > > Hopefully you will get this. Sometimes replies work better than original posts. > > On Monday, October 2, 2023 at 11:30:34 PM EDT, OlRivrRat <olrivrrat@comcast.net> wrote: > > > Hey DB > > Just so Ya know >> Did not recieve Your “grease on axek” EM,,, > > The most recent EM from You via List was 30Aug ~ > > As to the greasy axle issue > Probably not a show stopper,,, Can You > > take a Pic & post it somewhere, Or send directly to Me > I think I usually > > get Your direct 1s,,, but that being said, if I didn’t 1 I guess I would have > > no way of knowing ~ > > > > On 2 Oct , 2023, at 5:53 AM, John Lauterbach <john@JHL.MGACOXMAIL.COM <mailto:john@JHL.MGACOXMAIL.COM>> wrote: > > > > Dave, since I have found a shop to service my '91 Vanagon, and it runs perfectly, I > > have not had the inclination to get underneath it and see what is going on. If by > > inboard axle, you mean the one that goes into the transaxle, would it be a case of > > the a oil seal failing? John > > > > -----Original Message----- > > From: ddbjorkman@verizon.net <mailto:ddbjorkman@verizon.net> <ddbjorkman@VERIZON.NET <mailto:ddbjorkman@VERIZON.NET>> > > Reply-To: ddbjorkman@verizon.net <mailto:ddbjorkman@verizon.net> <ddbjorkman@VERIZON.NET <mailto:ddbjorkman@VERIZON.NET>> > > To: vanagon@GERRY.VANAGON.COM <mailto:vanagon@GERRY.VANAGON.COM> > > Subject: grease on axek > > Date: 10/01/2023 08:42:14 PM > > > > Hello all. > > Little disappointed in the list. Noone has an answer to my earlier post about grease > > on my inboard axel. > > I could really use some list wisdom. Do I need to get to a garage and have them > > squirt some grease in there?? > > Dave B.the Boston onePlease give me some input.
Have something to add on this topic today? Revive this thread in the forum »