HI David, 

I would recommend not putting it any closer to the back of the slider then Mark indicates.  If it is too clear the van and not rub the slider needs to be fully out away from the van and then the handle needs to clear the van C pillar.  I think the 9 inches gets yo the clearance but still as close to the rear edge of door.  Mark has likely done the research on that for us.

Eric 

> On Mar 19, 2024, at 5:48 PM, ddbjorkman@verizon.net wrote:
> 
> Hi Eric.
> 
> Yes.  A standard VW grab handle mounted on the metal edge below the slider window, angled slightly inward (away from window) positioned with the center of the handle just about centered on the seal between the rearmost window and the forward window in the assembly.
> 
> I might have mounted it slightly more rearward if I was to do it.  Diane likes it, so it may happen.
> 
> Dave Bl
> the Boston one
> 
> On Tuesday, March 19, 2024 at 04:38:54 PM EDT, Eric Caron <ericcaron96@comcast.net> wrote:
> 
> 
> Hi folks, 
> 
> I tried to get my wife to describe the picture. 
> 
> She could not read the ruler.  She counted 9 lines from door edge.  Is this 9 inches? 
> And handle on top edge by window seal so likely slightly bent inward . 
> 
> Can someone confirm?
> 
> Thanks,
> 
> Eric Caron 
> Blind list member. 
> 
> 
> 
> 
> > On Mar 14, 2024, at 12:44 PM, Mark Drillock <madvws@COX.NET <mailto:madvws@COX.NET>> wrote:
> > 
> > I have found that adding a different type of extra handle works really
> > well for us.
> > I mount a stock Vanagon grab handle to the siding door just below the
> > window.
> > This makes it far easier and quieter to close the door while sitting on
> > the bed/bench.
> > Here is a photo with ruler included for positioning info.
> > 
> > 
> > 
> > https://www.thesamba.com/vw/gallery/pix/1861636.jpg
> > 
> > 
> > Mark