]Date: Thu, 30 Jun 94 15:27:31 CDT
]From: Joel Walker <JWALKER@ua1vm.ua.edu>
]
]On Thu, 30 Jun 94 15:12:49 CDT William R. Kennedy, NJIT CIAT, 201-596-5648 said:
]>I'm told that the Vanagon bolt pattern is identical to Mercedes, and would
]>like to consider aftermarket Mercedes wheels, to get 15 inch wheels and tires,
]>thus larger rolling radius, thus higher effective gearing.  Does anyone know
]>details of this approach, as to offset, brake clearance, and what to use for
]>lug nuts/bolts?
]
]i tried to find out what the offset is for vw wheels, but didn't have any
]luck. the mercedes wheels have it stamped on them.
]
]one article in an old issue of HOT VWs shows a fellow with a vanagon (turbo)
]and mercedes wheels (1983-style). the only thing 'bad' that i have heard about
]doing this is to be sure to use the mercedes nuts/lugs. it seems that the
]vw have round bottoms and the mercedes have square bottoms. and the wheels
]are set for that type of bottom. in other words, you shouldn't use vw nuts
]with mercedes wheels. (or vice versa)

But where do you get the hardware to regear the speedometer?

-- 
-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Jerry Dunham, MSE                                             (512)244-8598
Tandem Computers, Inc.                                dunham@mpd.tandem.com
Integrity Systems Division                          dunham_jerry@tandem.com

   UNIX is a registered trade mark of AT&T. AT&T is a modem test command.