

| Subject: | Re: Help Help 009 Distributor? |
| From: | Armstrong, Charles L. |
| Date: | Thu, 03 Nov 94 07:19:00 cst |
>> sequoia@halcyon.com writes: >> > >> > I'm looking for someone to say "I've got a 009 on my bus, and it's been >> > fine for X years =) >> >> How about this: >> >> " I had an 009 on my bus for several years, and never *could* get >> it to run right." >> >> I'm sure there is a source out there for a stock replacement distributor. >> Find it, buy it, and be happy. :) If nowhere else, call Vee Parts here >> in San Diego at (619) 477-4787. They should be able to help. I would >> recommend avoiding the 009. >> >Interesting, as I have run a 009 on my '67, which has a 68 Beetle >engine, for at least 4000 miles, and it's been great. I put it on at the >beginning of this year, and if it's as bad as some are saying, I'd love >to get an old one- I'd be flying! :) >Anyway, no complaints here. >Richard OK, here goes. I have a 009 on my '70 Bus and have been running it for 7 years (about 90k miles) and have had very little trouble. I also ran a 009 on my '68 Bug for 10 years with very little trouble. I have found that it takes a little bit of time to get the 009 set up right(trial and error) but once it is set it runs fine. I also have found that the 009 does not run particularly well with any of the stock Solexes above a 30 PICT-1. I am currently running my '70 Bus with a '70 case, single port heads, 30 PICT-1, stock (factory) exhaust and the 009 at about 6 Degrees BTDC static timing. This is a compromise on the timing. It would run a little bit better with more advance, but I have experienced detonation with more advance at highway speeds so I backed off. I have good idle and no flat spot on transition. Just my $.02. Hope it helps. Charles carmstro@ssf3.jsc.nasa.gov '70 Bus '69 BMW 1600-2
Have something to add on this topic today? Revive this thread in the forum »