Skip to main content
Gerry | Vanagon
Checking account...
← vanagon.com home · Continue the discussion in the forum
Subject:Re: Throttle valve positioner
From:Dave Black
Date:Fri, 10 Feb 1995 09:28:21 -0700 (MST)

On Fri, 10 Feb 1995, Christopher Bridge wrote:

> I have a problem.  This thing is on my bus and has no hoses hooked up to it. 
>  Does anyone have this still hooked up or does everyone just take it off?  
> It's supposed to hold the throttle open when deceleration, and has two hose 
> connections to it. One is bigger, I think that this goes to the manifold for 
> vaccum.  the other goes to the carb?  There are 2 hose connections on the 
> carb, where does the other one go?
> Any help would be great!!
> Thanks

On both my VW's, this thing is still hooked up.  I have never run the cars
without it, so I don't know what the effect would be.  The connection is
from a fitting at the bottom of the carb to one side of the operating
mechanism (with the adjustable rod going to the carb linkage).  The other
side of this mechanism goes to the control unit (also called the altitude
corrector) mounted on the left side of the engine compartment.  This thing
controls how fast the throttle closes.  The other side of the control unit
goes to a port on the intake manifold.

Hope this helps!

Dave
'71 Westfalia & SB