

| Subject: | Re: Testing Generator and Volt. Reg. |
| Date: | Wed, 12 Apr 1995 12:07:08 EDT |
Rachel: I had to do this to my bus last month. The gen. light came on while returning from a "dawn patrol" in Rhode Island. Apparently my voltage regulator (VR) went on the fritz. I disconnected it and continued on home. It took me awhile before getting the VR (I didn't know the exact one needed as my '65 micro was retrofitted with a '73 1600 DP) By the time a got one and the periodic connecting and disconnecting of the VR - I had to use the bus as it is my daily driver, - I fried the generator. If you cannot ascertain if the generator is good/bad via Muir or other manuals, try this- disconnect the fan belt such that the generator turns freely. Then hook up the wire from the Polarize the generator as discribe in Muir- this should make the generator run like motor. If it does this then the generator is good and the VR is most likely bad. good luck. christian
Have something to add on this topic today? Revive this thread in the forum »