

| Subject: | Re: Has heat, but it smells |
| From: | Gerald Skerbitz |
| Date: | Tue, 19 Sep 1995 21:46:45 -0500 (CDT) |
On Tue, 19 Sep 1995 EF0JPB1@mvs.cso.niu.edu wrote: > >From: "Casey, Tim" <tcasey@HDRINC.COM> > A while back I looked at my Bentley to see about similar > work under the dash. When the first step was to drill out > the breakaway bolts for the steering column, I figured it > would take something crucial for me to take that little > project on. Good luck. Naaaaaah. This is a breeze. I pulled mine off with a vice grips and they came off easily. I replaced them with new ones that didn't break away. > > >Also, today I noticed the top ventilation control lever (for > >the windshield) does nothing, and feels like it is attached > >to nothing. Can anyone shed a little light on these for a > >still-Bentley-less, slightly chilled list mate? You can view the path of the wires by looking under the dash and by taking the glove box out. If you take the glove box out, I THINK you can see the one for the defrost. They are held on by these weird clips that are hard to get on but appear to work well. I took my dash off because I had some of that smell, and one of those clips sprang away....I ended up having to buy a new one from the dealer. I was able to get it back on even thought I had put the dash all back together. The dash removal isn't hard, it's just tedious and sometimes painful because you scratch the backs of your hands trying to maneuver everything back into place. I'm pretty confident that I could do it again, and I know I will have to. I just don't want to spend over $100 for a friggin heather core. > This at least should be easy. All the cables can be traced > without too much trouble after you remove the plastic heater > core cover, This may not be obvious, but the piece of "dash" right in front of the shift lever just slides right out after twisting some clips at each side. Give me a call if you think about doing it, but buy a new core foirst. I couldn't find a leak in mine. -- Gerry Gerald Skerbitz <gsker@med.umn.edu> U of MN Med School Admin 6-5379 Home St. Paul,Ramsey County,Minnesota, USA
Have something to add on this topic today? Revive this thread in the forum »