Skip to main content
Gerry | Vanagon
Checking account...
← vanagon.com home · Continue the discussion in the forum
VanagonEuroVan
Subject:'81 VW rebuild report
From:Richard A. Jones
Date:Tue, 12 Dec 1995 16:52:32 -0700

Prior situation:  '81 with 103,000 miles.  No work on engine
other than pushrod tube seals on each side at different times.
Starting about 90,000 miles, I noticed a loss of power, increased
use of oil.  It did pass emissions a year ago, but the oil
consumption kept increasing.  Leakdown showed the rings were worn.
Recently there was the beginning show of smoke when shifting after 
hard acceleration....

I asked on the net (September) and got some good/bad responses
on VW rebuilds.  My mechanics favor VW over other (GEX, et al)
based on past experience.  Plus the VW comes with a flywheel.
So we ordered a rebuilt long blockfor my '81.  It took about 
a month to come....

It went in, started on the first turn and ran fine.  After coming
up to temperature, the oil/filter was changed.  One valve cover
gasket leaked so was changed.  Now I have about a thousand miles on 
it, it has settled down and runs great.  No leaks, no problems.  
I plan on another oil/filter change soon and will declare the 
break-in complete.

BTW--mechanic said it came with NEW heads--evidently VW in Canada
didn't have any to rebuild when this motor was put together.
Other items wearing out at the same time:  clutch, motor mounts,
pilot and throwout bearings.  So the whole package had pretty
closely match life expectancies.  :-)

So I got 103,000 miles with only pushrod tube seals, a new exhaust
system, two clutch slave cylinders, and some front bushing work.
All of this at elevations above 5,000'--up to 10,000'.
I think I'm not allowed to complain.  ;-)  All I want is 100,000
miles and 14 years from the new motor and I'll stay a happy camper!

				Richard A. Jones
				Computing & Network Services
				University of Colorado at Boulder
				(303) 492-3865 - fax (303) 492-0824
				[http://bakmes.colorado.edu/~jones/]
				<jones@colorado.edu>

Have something to add on this topic today? Revive this thread in the forum »