In a message dated 96-03-05 14:39:06 EST, SyncroHead@aol.com writes:

>> Also, how difficult (time and tools) is it to replace a boot on the cv
>>joint?  Mine is cracked.
>
>I recently replaced the grease in two joints on one axle beacuse the outer
>joint was clicking.  Removing, regreasing, and installing the axle took
about
>2 hours.  This is lying on my back in the driveway - a shop with a pit or a
>lift would be MUCH quicker.  I'd add about 1 hour to my time to remove one
>joint, replace 1 boot, and re-install the joint.  You'll need an allen head
>"socket" for a 1/2" ratchet (I used a 3/8" drive allen with a 3/8" to 1/2"
>drive adapter) & 6" extension to remove/replace the axle.  I THINK you'll
>need a vice, a hammer, and a c-clip tool to remove/install the CV joint
>from/to the axle.                    ^^^^^^^^^^^

My circlip "tool" was a big screwdriver and a small needle nose pliers...
 works for me.  I'm sure the "proper" tool would work best, but sometimes you
work with what you have!  Vise is mandatory, especially when working solo.

Ruthie
'75 Westy