Jack, you sure it's not a worn door seal that's causing you problems? I 
removed my seal for bodywork/painting and I've noticed a marked difference 
in the quantity/quality of noise in the van. 

You might get some cheap weatherstripping and apply it strategically (on 
the corners to see if that stops the rattle. Just a thought.

8^) Joe

On Mon, 1 Apr 1996, Jack Bradley wrote:

>         Just curious, but what are the tolerances supposed to be for
> clearance between the top front roller on my sliding door (`70 bus) and the
> rail in which it slides in?  When driving down the road it rattles pretty
> hard when I hit a bump or whatever.  Is there supposed to be some kind of
> bushing between the metal roller and the rail?  I'd say that there is about
> 1/8th of an inch on either side now.  I'm fairly sure that it would be safe
> to say that it's well worn.. 
> 
> Jack Bradley
> (bugman@lava.net)
> http://www.lava.net/~bugman
> 
> `79 Triple Black SB conv.
> `70 Westy
> 
> 

----------------------------------------------------------
Joseph F. Fournier II <jfourni@comp.uark.edu> 501.575.7353
<a href="http://comp.uark.edu/~jfourni/"> Joe Fournier</a>
----------------------------------------------------------