Be careful the crow doesn't get stuck in the fan or you'll have real 
temperature problems.
 ----------
|From: bighouse
|To: Multiple recipients of list
|Subject: Re: Request for .009 timing measurments
|Date:  June 26, 1996 5:37PM
|
|
|>Does someone have the measurements [inches or cm] from 0
|>on a stock-sized crank pulley for 7.5 and 30 BTDC? I seem
|>to remember 7.5" being about 3/8" to the left of 0.
|
|Measuring on a stock-sized degree wheel I never have installed:
|
|7.5 degrees =  .45" or
|                3/8" or
|                11 mm
|
|30 degrees =   1.75" or
|               1 3/4" or
|               44 mm
|
|I'm measuring as the crow flies, not rolling around the diameter.
|
|--Ken
|
|
|