In a message dated 96-06-10 12:13:36 EDT, kersey@bga.com (Bo Kersey) writes:

>I am trying to install a cruise control (from Sun Distributing) on my '89
>Westy and I cannot find a way to connect the actuator cable to the throttle.
>It seems like it would be easy, however, there is no place w/in 18" of the
>throttle to fix the cable sheath.  

When I installed cruise in my 87 Syncro I routed the cable from the throttle
forward & toward the passenger side so that it came near the firewall.  Near
that point I installed a large bracket on the top/left engine/transmission
bolt so that I would have something to anchor the cable to.  You should be
able to find something suitable at the hardware store to make a bracket from.

>From thisd attachment point the cable curves toward the left/rear area of the
engine compartment.  I mounted the actuator in the space just forward of the
left tail light.

Good Luck,
Jim Davis
87 GL Syncro
88 GL Wolfsburg