On Wed, 24 Jul 1996 DBRADSHAW@mscc.cc.tn.us wrote:
> 
> Just a few weeks ago, I replaced that section of pipe on my 85.  Yes, the Bosch
> sensors are expensive ($60-80); however, your FLAPS can get you a "universal"
> one that requires a small bit of wiring on your part, for about $20--apparently
> works just the same.

Mine screws into the converter and not the pipe section, but if a 
universal one works, why does anyone buy the bosch in this case?  By the 
way, the bosch for the '87 is around $140.  The reason I ask is that when 
I called busboys, they first quoted ma e price  for the '85 O2 sensor 
which is about half the price of the '87 sensor.  I assume that there 
must be some difference.

> with getting gaskets off, but with getting the darn old bolts out.  Had to heat
> them up with a propane torch and punch them out--a real pain.

Do you have your own torch?  I drove my vanagon to a local muffler shop, 
and for some reason they torched the bolts for free (the 3 bolts holding 
the connector pipe to the cat. converter).  I also broke the head off one 
of the bolts for the muffler clamp, so they torched that out for me too.  

Guess I'll take the good luck with the bad.

david