Chris Chubb wrote:
> 
> If you have not yet begun to fight the rear axel nuts, let
> me give you my four cents worth. I am a scarred and tested
> vetran of the axle-nut-wars.
> 
> Hint #1: DONT use a 'flex handle' or 'breaker bar' for these
> applications. What you want is the 3/4 inch 'sliding T handle'
> It is much beefier (TM) than the flex bar, and can handle
> the stress. At Sears, it is even cheaper than the breaker bar.
> It does not have a long handle, only like 18 inches, so you
> will need some pipe. I reccomend 10 feet of galvanized water pipe. 

Better yet; get an *AXLE NUT DRIVER WRENCH*!

Your 1/2 breaker bar goes in it, you put torque on the handle, frap the 
hell out of it with a 5# sledge, and it WILL come loose. No broken tools 
or knuckles!
 
 
> Good luck doing this, is can be quite fun!
> -- Chris Chubb (cchubb@ida.org) - (703)-845-2287 [Alexandria, VA, USA]
> ____________________________________________________________________
> \All opinions expressed or implied may not reflect those of the     \
>  \Institute for Defense Analyses, the US Government, or anyone else. \
>   --------------------------------------------------------------------

Douglas