

| Subject: | Re: Heated rear window on Vanagon |
| From: | Jeff & Jean-Marie Diebolt |
| Date: | Sat, 19 Oct 1996 21:08:52 -0400 |
You need two wires, one supplies the power, the other is the ground. Yes it is as simple as installing a switch and connection to the fuse box. The second wire is the ground. You can ground it to the door itself, although it is not a real good idea to send the current through the hinges, although over the long haul it probably won't do squat. VW runs a second wire back to the body and grounds it there. At 05:32 PM 10/19/96 -0500, Lionel Tun wrote: >1982 Bus (Transporter/Caravelle in UK, Vanagon is USA): >The PO has left a heated rear window with one wire attached to the heating >elements. This wire disappears into the rear hatch. Would it be >straightforward to find it at the dashboard end and connect it to a switch >and a spare terminal on the fusebox? Or does it need two wires - there is >another connection to the heating elements at the other side, but there is >no hole in the rear hatch for a wire on that side. > >Lionel Tun >lionel@dircon.co.uk > > Jeff & Jean-Marie Diebolt --- Greetings from Michigan's Upper Peninsula e-mail:<jdiebolt@up.net> fax:(906)359-4517
Have something to add on this topic today? Revive this thread in the forum »