

| Subject: | Re: thermostats, Was: Diesel "stumbling |
| Date: | Tue, 3 Dec 96 21:46:21 EST |
Not all thermostats are created equal! Particularly for the vw inline 4 diesel I have found that several brands of thermostats don't work -- even when new!! Good thermostats: Behr Thompson Wahler Not good in my experience: Motor craft Stant (or stent or something like that) The not good ones have a weak spring (compare your new and old thermostat at the FLAPS before buying), and at high rpm the water pressure from the pump forces the thermostat open regardless of temperature. This causes the temperature to drop dramatically. For my last "bad" brand (Motor craft) it happended between 55 and 60 mph in the bus. /Martin At 03:36 AM 12/3/96 -0600, you wrote: >P.S. Thermostat seems to be stuck open, little heat and the needle doesn't >move off cold ( I know the guage does work after taking the car over the >mountains). > >Best, > >Bill Lund Austin (austins@ix.netcom.com) writes: Fix it now!!! This is a 'minor' situation that can (will) cause big problems; a stuck-open thermostat will increase engine wear like you wouldn't believe - the poor thing never runs at design temperature, rather lt's constantly running as if it has just been started (& please don't ask how I found out, at least it wasn't the Vanagon). Also, thermostats have a bad habit of getting 'lazy', i.e. they open too soon (or actually never completely close when cold) and the engine consequently starts taking a l.o.n.g time to warm up. Keep track of what your gauge is telling you, believe it, & replace the thermostat as soon as it starts getting lazy (cheap,~ $10, & can be done on a Vanagon in ~ 1/2 hour). Austin
Have something to add on this topic today? Revive this thread in the forum »