> Date:          Mon, 24 Feb 1997 17:54:00 -0600
> Reply-to:      kmiller@accessone.com
> From:          "Kathy Miller" <kmiller@accessone.com>
> To:            Multiple recipients of list <vanagon@lenti.med.umn.edu>
> Subject:       Battery Removal - '87 Camper

> ... there must be an easier way!!!!   Because the base for the captain's
> seat is so far back, the only way I was able to get enough room to remove
> the battery was by taking pliers & bending up the metal on the rear rim of
> the battery compartment.  Tell me this isn't something I'll have to do
> every time I remove the battery !!!!!  I did move the seat as far forward
> as possible, & swivel it to the side, which gained a couple millimeters
> more clearance.  But the whole base of the seat covers the first inch or so
> of the battery compartment & I couldn't figure out how to actually move the
> base.
> 
You can't move the swivel base without removing the seat, but the 
battery should squeeze by with the base turned to the right angle. 
It is a really tight fit, so maybe some brands of batteries are worse 
than others.
If you're having trouble sliding or swivelling the seat, now might be 
the time to remove it & clean/lube the swivel base & tracks, and make 
the battery job easier...

Shawn & Janis Wright
'88 Westy (338k) '85 Jetta TD (367k)
VWnut@smus.bc.ca (swright@smus.bc.ca)
http://www.islandnet.com/~swright/vw.html