

| Subject: | Re: '81 #3 cylinder |
| From: | Beth Young |
| Date: | Wed, 26 Mar 1997 17:08:22 -0800 (PST) |
On Wed, 26 Mar 1997, bill wrote: > As I reported earlier, pulling off the #3 wire from the distributor makes > no difference how the engine runs. > > I checked the spark, and it is fine, so I suspected the fuel injector or > wiring. First, I swapped the wires on #3 and #4, with no change. Then, I > swapped the injector on #3 with the one on the #4. Again no change. > > I really don't know what to try now. Any suggestions will be appreciated > and tried. How about swapping spark plugs? I've heard of defects in plugs that only make themselves know under the heat and pressure of the cylinder. Despite the fact the plug seems to be OK outside of the cylinder, it might not be functioning properly when it's screwed into the head. --------------------------------------------------------------------- Tom Young young@sherlock.SIMS.Berkeley.EDU Lafayette, CA 94549 '81 Vanagon ---------------------------------------------------------------------
Have something to add on this topic today? Revive this thread in the forum »