Dave Sidote wrote:
> 
> Hi Volks,
> 
> Recently there was a post about making sure the ecu was grounded. I went
> and looked at the ecu on my 83 WB and it appears that the ecu is more like
> insulated from the body. There is that plastic housing attached to the
> frame. There doesn't appear to be any were to ground it (wires?) Does
> anyone know anything about this. Also, is it true that upper control arm
> bushings are dealer only? Has anyone changed them? Thanks.
> 
> Dave
> 
>  /\/\/\/\/\/\/\
> |Dave Sidote   |
> |Flemington, NJ|
> |83 WasserWesty|
>  \/\/\/\/\/\/\/
>   A student is not a vessel to be filled, but rather a torch to be set
> alight.Dave,
	My experience is ..some time ago I had a problem with the westie 
near stalling when i turned sharp right hand corners and some times it 
falterd when going over large bumps...had me flumuxed for a while then I 
removed a small diecast box heater that i kept stored between the rear 
heater and the ECU the problem went away never to return(Theory...The 
metal heater was grounding the ECU???)
s'all I got
Dave WR3i