

| Subject: | Re: Neat Camper upgrade |
| From: | Rodney L. Boleyn |
| Date: | Tue, 13 May 1997 12:05:50 -0400 |
"James R. Wetzel" <jrwetz@sunlink.net> wrote: >RubatoGuy@aol.com wrote: >> >> Ron asked: >> >What *is* a GIFI outlet? >> >> Ground Fault Interuption Circuit (GIFC) Opps, looks like I did the accronym >> wrong. >> >It is really GFCI or ground fault circuit interrupter. They can kill >power in 1/40th of a second and will "Trip" if there are slight current >changes (Or a big one). Excellent idea. Closer, but I still don't think this is an accurate description. In a 3-wire household electrical system, the hot wire and the neutral wire are the normal source and sink of the electricity (since it's A/C, they take turns as source and sink of current). The ground wire hangs around as a protective path to ground, and it's usually used for grounding appliance housings and such. The ground wire is not actually *in* the path of the electricity flow at all. Now, your household circuit breakers detect over-currents through the hot and neutral wires. The only way a panel breaker trips on a ground fault is if the fault drains enough current through the hot wire to throw the breaker, and then only because the over-current is being supplied by the hot wire, not because it's being drained to ground. But the point of a GFCI outlet is, NO current is ever really supposed to drain to ground. Even a few milliamps to ground could signal that something is wrong. A 20A circuit breaker isn't going to notice when a 5A appliance suddenly starts drawing 5.03A and draining 30mA of it to ground. The GFCI outlets have sensors in them that detect even very small currents going down the *ground* wire, and trip the internal breaker regardless of what's going on with the hot and neutral wires. -Rodney
Have something to add on this topic today? Revive this thread in the forum »