In an attempt to help the US balance of trade, I'd like to find a right
low-beam lens assembly and a right power mirror housing for an '89.  That's
$420US at the dealer.

Any out there for substantially less than that?

The headlight had a rock hole in it and water got in.
I removed it and crazy-glued a small piece of mica over the hole.
Then I put a 20W halogen lamp next to the lens to dry it out, with the 9006
bulb removed so it could vent.  I had it glass-down with the light about
one ince away.
After about 15 minutes I heard a noise from the headlight assembly.
Headlight assemblies are not ordinarily noise-producing items.
The glass of the lens had cracked, diagonally from corner to corner.
So I dropped crazy-glue on the new crack...
Gonna need a new one now *sigh* and I'd like to avoid giving the dealer
$160US...

I'm going to drill a longitudinal hole through the broken mirror housing to
hold it on, sans wires. I paid less for The Bozobus itself than that mirror
assembly costs...

bcnu - Grungy (John Gladu)     (Houston, TX)    Opinions are just that
INTERNET: jgladu@bcm.tmc.edu                       VOICE: 713-997-1117
'60 dddPanel walk-thru  (The Bozobus)-----resting - melting 1600dp----
'89 Vanagon GL----------------------------good!-----------------------
'90 Vanagon GL----------------------------good!-----------------------
'68 & '69 Bugs--(Frunobulax & Bertha)-----on vacation (engineless)----