Hey, I have that same airflow problem.  Where is the air flow meter
located?

Nate El Great
85 GL 168k miles
"Albania", NY

 -----Original Message-----
>From: owner-vanagon [SMTP:owner-vanagon@GERRY.SDSC.EDU]
Sent: Saturday, August 23, 1997 7:17 PM

=========================================================================
Date:         
Sender:       Vanagon Mailing List <vanagon@vanagon.com>
From:         
Subject:      Re: 88 Vanagon air flow meter question

Mine is glued on too - Needed to be carefully pried off.    After I
repositioned the wiper arm, I just reglued it with silicone.

Dave

At 11:55 PM 8/22/97 -0400, John Graham wrote:
>I think that the cause of some early morning hesitation and stalling at
>idle may be due to the age and condition of my air flow control box.  I
had
>a 1980 model with a similar box and the black plastic cover on top,
would
>just pop off.  Mine appears to be glued on.  Does this indicate work by
the
>PO or the PO's repair shop?  Should that black plastic cover be
removable
>so that I can check out the resistor and wiper arm that hide inside?
>
>John Graham
>'88 Westy
>Charlotte NC
>
>