Skip to main content
Gerry | Vanagon
Checking account...
← vanagon.com home · Continue the discussion in the forum
VanagonEuroVan
Subject:Re-stubbing fuel injectors
From:kenneth d lewis
Date:Thu, 25 Sep 1997 11:46:03 EDT

Vananuteers:
I decided to proceed after the two "horror stories" and one encouraging
response to my query of replacing the short hose attached to the
injector. At first glance the feasibility seemed questionable due to the
crimped manner of attachment. It turned out to be quite easy and the
results very satisfying. All that was needed was an Exacto knife with a
long, sharply taper blade. First I slit the hose down the entire length .
This involved a little bit of digging under the crimp(15seconds worth).
Then the hose could be easily peeled from the barbed nipple on the
injector. Once the hose is removed the crimp just falls off.

Drive Safely & Good Luck
Ken Lewis     <Kernersville NC, The Heart of the Triad>
86 VW Transporter Three Door Pickup
60 Porsche T-5 Coupe
85 VW GL Vanagon<Elvis>awaiting engine

Have something to add on this topic today? Revive this thread in the forum »