On Sun, 07 Sep 1997 13:16:49 EDT kdlewis@juno.com (kenneth d lewis)
writes:
>Jim:
>Checked our 85 AFM, measured 561ohms between 3&4. FWIW 2.3kohms in
>parallel to 740 will produce the requisite 560 ohms. I know there is a
>schematic for the AFM but can not locate. I will keep looking. On page
>24.28 it is stated that 500 to 1000 ohms is OK. This confuses me
>because I also have seen that 560 ohm spec somewhere.

Ken -

Thanks again for your looking - It might be noted that I have a 1984
published Bentley on page 24.28 that shows the 560 ohm spec.  However,
the latest published Bentley on page 24.28 says that terminals 3 & 4
should be between 500 to 1000 (1K) ohms.  Would have never looked at the
updated Bentley unless you had mentioned it.  So the AFM MAY be OK, but
who knows?

Jim Thompson
Sherwood Automotive * The Old Volks Home
http://www.c-zone.net/jim96003/oldvolks.htm
oldvolkshome1@juno.com (916) 221-5342
84 Westy 2.1 * 62 Beetle Sedan * 90 Fox Wagon