Skip to main content
Gerry | Vanagon
Checking account...
← vanagon.com home · Continue the discussion in the forum
Subject:Re: Fridge modification
From:David Katsuki
Date:Wed, 10 Sep 1997 11:28:27 -0400

Todd,

It's an excellent thing to do - my fridge starting problems went away
completely, and I didn't even replace the check valve - just drilled the
end of the pump out (not as big a drill as the manual says - I was chicken,
since the recommended drill  seemed just about as big as the end tube), and
then  I put some silicone grease on the piston (and added the gasket on the
piston that is mentioned in Bentley).

Made a big difference.   The new check valve would probably be even better.

Dave

 At 05:02 AM 9/10/97 -0400, Todd Last wrote:
>In the VW manual there is a procedure to modify the air pump in the fridge by
>drilling out the pump outlet and adding a check valve.
>
>Is this a worthwhile thing to do while I have the fridge out of the van?
>
>Also, is there a clever way to check the 12v heater with the fridge out of
>the van?
>
>Thanks
>Todd
>'88 Westfalia GL
>
>