Old Volks Home (jim@OLDVOLKSHOME.COM) spake thusly on the momentous date
of 12/8/97 1:50 PM

>Disconnected the battery and pulled the Voltage Regulator/Brush Assembly.
>Sure enough, the brushes were shot all to hell, hardly anything left.  Used
>an inspection mirror to check the slip ring (the rotating surface the
>brushes ride on) and it was smooth and OK, no grooves.  Replaced the
>VR/Brush Assembly and that cured the problem.

     Okay, I pulled the brushes and pretty much knew that the slip ring
was shot, as the brushes were of different lengths, by about 5mm, and
were worn off-center.  It seems that the bearings are okay.
     I can't tell from my Bentley.  Is the slip ring available as a
replacement part?  How much soldering/pressing is involved in replacing
it?

_________________________________________________________

Bob O'Shaughnessy
84GL, 85GL project (Now Running!!! Waiting for tags!) (Mine)
82 Diesel L with carbed Rabbit engine (belongs to friend)
74 Bus (Dad's)
72 Wife, 94 Rabbit, 95 Cat, 96 cat.