

| Subject: | Lug nuts, new engine, etc. |
| From: | James R. Gilbert |
| Date: | Tue, 31 Mar 1998 11:04:43 -0500 |
Lug nuts. 110 ft/lbs. for sure. Had a wheel come off. It had been loose for months, but didn't realize the clank noise back there was the wheel rim banging around. Especially the driver rear wheel. Check them periodically. Was gonna look up vergnugen in Germ/Eng dict. But I'll go ahead and post this. *************** Report: Newly installed, re-built engine. 2.1 liter digifant. '87 Wolfsburg. 2162 mile trip. 16.3 mpg avg, nearly all highway driving. Here's the thing. I once said in this group to adjust the, oh about 1.5 cm 'adjusting screw' on the intake, a large, obvious adjustmen screw (bolt actually), to adjust the idle speed. I totally retract that. That screw adjusts the air flow, I'm now thinking, on the air flow control fuel injection. I had the 'bumpingintermittent power' problem. I kept adjusting this screw. The 'bumping' got better and better, upon counterclockwise rotation (making the fuel/air mixture path bigger, I think). The idle was too high, but the bumping stopped and I had good power at highway speeds. The moral of the story is do't adjusthat screw to reduce the idle speed. I think the idle speed is supposed to be controlled by the computer, actually. And, I think my intake isn't in good shape it should be, so the idle speed doesn't come down properly sometimes. The final moral is, I gotta read my Bently and try to figure out some about the intake adjustments, the springs, and other apparatus around the intake, to properly adjust the intake, and maybe figure out why my idle is too high when the intake screw is adjusted so the vehicle doesn't 'bump/lose power' at highway speeds. And one more thing. I was travelling in rain most of the time. My front floorboards were always wet under the rubber foot pads. I noticed once that the front floorboards are made of wood. I suspect these boards aren't sealed properly and I'm getting water splashed up thru the cracks or something and getting wet carpet up front. All above is preliminary, possibly incorrect, and a good reading of Bently and examination of the under side of the front floorboards would help verify/unverify what I'm saying. Happy farvernugen (I think that means travel far, which I use my vanagon for, actually.) Russ '87 Wolfsburg
Have something to add on this topic today? Revive this thread in the forum »