Darrell Boehler wrote:
>
> --------------
> Hi George,
>     You can use a variable voltage regulator. I use a the  LM317T from radio
> shack for many applications. The radio shack part number is 276-1778. T

  Ten Volt reg. are avalable at any GOOD electronic shop. TRY LM2937
  or TL750M10.   You must get the data sheet, and check the pin out!

  Also if the existing regulator is blow out, there is an extiting
  problem I would solve first. Check to make sure the ground lead
  is making a good ground. The only other problem that would cause this
  is much load. Unlikely if it works for a time.

                            Eric

    PS. The first 3 people to send me your name and address
        I will send you a regulator for free!!!!!!!!

        I gotsss some samples for a project at work that
        we didn't use.